|
Scroll down the page or click any of the above images to see the different patterns
Interwoven lattice grilles hand woven from plain or reeded ribbons of solid brass, stainless steel and aluminium
We offer a wide choice of apertures and ribbon widths hand finished if required in a choice of BMA or Pewter. Nickel and Chrome plating are also available Lacquer can be added if you wish to maintain the appearance, however many customers prefer to let brass in particular age over time to give it its own unique patina. If BMA is chosen lacquer is applied as standard.
BMA - Bronze Made Antique
This hand finishing is achieved by copper platting on our brass mesh before the antiquing solution is applied. It is available on all of our patterns with a maximum size of 1200 x 600mm . Each batch of grilles may vary in colour adding to the uniqueness of your grille.
Pewter
Pewter Grilles are hand woven from steel ribbons which are then powder coated to give an extremely hard wearing paint finish.
Any backing can be added to any pattern to enhance the appearance of your chosen grille
|
|
 |
 |
 |
| Square Brass Reeded 3.0mm Wire |
Diamond Stainless Steel Plain 3.0mm Wire |
Square Brass Made Antique Reeded 3.0mm Wire |
|
|
 |
 |
 |
| Diamond Pewter Powder Coated Plain 4.7mm Wire |
Square Stainless Steel Reeded 4.7mm Wire |
Diamond Brass Made Antique Plain 6.0mm Wire |
|
|
 |
 |
 |
| Square Brass Reeded 3.0mm Wire |
Square Stainless Steel Reeded 3.0mm Wire |
Square Brass Made Antique Reeded 3.0mm Wire |
|
|
 |
 |
 |
| Square Brass Reeded 3.0mm Wire with Backing Mesh |
Square Stainless Steel Reeded 3.0mm Wire with Backing Mesh |
Square Brass Made Antique Plain 4.7mm Wire |
|
|
 |
 |
 |
| Diamond Brass Reeded 3.0mm Wire with Backing Mesh |
Square Stainless Steel Plain 6.0mm Wire |
Diamond Brass Made Antique Plain 4.7mm Wire with Backing Mesh |
|
|
 |
|
|
| Pewter Powder Coated |
|
|
Framing is available for all of our grills in a choice of finishes Please contact us for a quotation |
|
|
|
| |
|
|
|
Frames are available in different edging sections |
|
|
|
" T " Section Ideal for face fixing in an opening where the leg of the T fits into the opening |
|
|
|
" L " Section Traditional angle frame available in equal and unequal section |
|
T section brass frame |
|
" I " Section Flat bar section |
|
|
|
|
|
 |
|
Extra Information
When calculating the size of grille you require please add approx 15mm minimum to your aperture size on all sides to enable fixing behind a recess. As the grilles are manufactured symmetrically in all directions to your specific sizes they will match if ordered as sets. Please remember to divide up your grille if spanning a number of openings as this may lower the price.
Delivery
We aim to deliver your order within 10 working days (special finishes add a further 5 working days) but it is sometimes dependant on stock being available. Deliveries are made Monday to Friday (excluding bank holidays ) using a national courier and are not timed unless specially requested. Items must be signed for therefore if there is no reply when delivering a card will be left asking you to contact the courier to arrange a convenient re-delivery time or you may collect from their local depot, timed and second deliveries incur an extra charge. Deliveries can also be made to your place of work or a neighbour if you prefer. This address must be placed in delivery address when placing order. You can collect from our factory if you prefer. Please call first to arrange a convenient date
Payment
Payment using our secure online card payments is simple. Google Checkout is also available. If any other payment method is preferred please contact us.
Back to top
|
